Pre-Order Only
- Total weight of 2.3 kg (5.07 lb.)
- Support cameras up to 3.6 kg (8 lb.)
- Precision of Control: ±0.02°
- Tool-Less Balance Adjustment System
- Transmitter for Remote Pan/Tilt Control
- Silent mode for quiet operation
- USB and Power Tap Power Outputs
- Assistant Software for iOS and Windows
- Bluetooth Wireless Interface for Setup
Specification
Performance | |
---|---|
Load Weight (Reference Value) | 8 lb / 3.6 kg |
Angular Vibration Range | ±0.02° |
Maximum Controlled Rotation Speed | Pan Axis: 90°/s Tilt Axis: 100°/s Roll Axis: 30°/s |
Mechanical Endpoint Range | Pan Axis Control: 360°/s Tilt Axis Control: +105° /-165°/s Roll Axis Control: ± 110°/s |
Controlled Rotation Range | Pan Axis Control: 360°/s Tilt Axis Control: +105° /-165°/s Roll Axis Control: ± 25°/s |
Electrical and Mechanical | |
---|---|
Motor Type | 3 x Brushless |
Working Current | Static Current: 300 mA (at 16 VDC) Dynamic Current: 600 mA (at 16 VDC) Locked Motor Current: 10 A maximum (at 16 VDC) |
Sensors | Independent IMU module Temperature sensor |
Processing | 32-bit DSP processor |
Receiver | |
---|---|
Frequency | 2.4 GHz |
Expandability | D-Bus receiver supported |
Connectivity | |
---|---|
Wireless | 2.4 GHz for transmitter (remote controller) Bluetooth 4.0 |
Wired | 2 x 12 VDC regulated PowerTap 1 x USB power output (500 mW) 1 x DJI Lightbridge interface |
System Requirements | |
---|---|
Assistant Software |
Desktop: Windows (32- or 64-bit): 8, 7, XP SP3 Mac OS X: 10.9 or above Mobile: |
General | |
---|---|
Control Modes | Underslung Mode Upright Mode Briefcase Mode |
Supported Camera Dimensions | Maximum depth at center of mass on camera base plate: 4.7″ / 120 mm Maximum height measured from top of camera base plate: 7.7″ / 195 mm Maximum width: 6.3″ / 160 mm |
Power Requirements | 4S Ronin-M Battery |
Operating Temperature | -5 to 122°F / -15 to 50°C |
Dimensions (W x D x H) | 19.7 x 8.3 x 16.5″ / 500 x 210 x 420 mm |
Weight | 5.07 lb / 2.3 kg (fully loaded with handlebar) |